LOSI Eight 1/8 TT 4WD RTR

Key Features

Your fast track to nitro buggy racing

4mm T-6 aluminum chassis plate

Gen III radio tray for longer servo life

Dynamite® .21 nitro engine with pull start

Pre-set suspension geometry

Metal-gear transmission and sealed differentials

Center and rear dogbones

15mm adjustable oil-filled shocks

Spektrum™ waterproof metal-gear servos

Includes Spektrum DX2E DSMR® transmitter

Includes Dynamite 1600mAh 6V NiMH receiver pack

Needed to Complete

20-30% Nitromethane fuel

Nitromethane-Approved Dispenser

NiMH Charger

Glow Igniter

What's in the box?

(1) 8IGHT 4WD Nitro Buggy RTR

(1) DX2E Transmitter

(4) AA Batteries

(1) Dynamite 1600mAh 6V NiMH receiver pack

(1) 4-Way Cross Wrench

(1) Bind Plug

(1) User Manual

Overview

If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT option parts currently available.

Race-Proven Durability

In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.

Brute Power

A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Approximate Assembly Time:No assembly required

Ball Bearings:Yes

Batteries:Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump

Body:8IGHT Cab -Forward, Screened

Brakes:Composite Disc with Steal Pads

Bushing Material:Metal

Chassis:4mm, 6061 T-6 Aluminum

Completion Level:Ready-To-Run

Differential:Sealed viscous filled gear differential

Drivetrain:4WD

Engine Size:.21 Dynamite

Final Drive Ratio:11.5:1

Front Track:12.0 in (305mm)

Fuel Tank Capacity:125cc (4.2 Oz)

Gear Pitch:1.0 Module

Ground Clearance:2.4 in (60mm)

Height:7.1 in (180mm)

Internal Gear Ratio:3.92:1

Length:19.6 in (497mm)

Pinion:17T

Radio:Spektrum DX2E 2-Channel

Rear Track:12.1 in (307mm)

Servos:Included

Shock Type:16mm Big Bore Aluminum Oil Filled

Size/Scale:1/8

Spur Gear:50T

Suspension:Independent

Tire Compound:Medium

Tire Diameter:4.4 in (111mm)

Tire Tread:XBT

Track:12.1 in (307mm)

Vehicle Type:Buggy

Weight:7.8 lb (3.5kg)

Wheel Diameter:3.3 in (83.5mm)

Wheel Type:Dish

Wheel Width:1.7 in (42mm)

Wheelbase:12.7 -12.9 in (323-327mm)

Width:12.1 in (308mm)